长期供应未指定 LNP™ LUBRICOMP™ ML004S compound原材料 ！关于LNP™ LUBRICOMP™ ML004S compound注塑温度(成型温度),LNP™ LUBRICOMP™ ML004S compound缩水率,LNP™ LUBRICOMP™ ML004S compound流动性等相关参数请参照沙伯基础厂家提供的物性表数据。
以下数据由:PBT http://pbtsl.com/ 提供
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | ||
| 比重 | ASTMD792 | 1.03 | g/cm3 | ||
| 收缩率-流量(24小时) | ASTMD955 | 2.0to4.0 | % | ||
| MoldingShrinkage-AcrossFlow(24hr) | ASTMD955 | 2.0to4.0 | % | ||
| 吸水率(24hr,50%RH) | ASTMD570 | 0.020 | % | ||
| 吸水率(平衡,23°C,50%RH) | ISO62 | 0.020 | % | ||
| 拉伸模量2 | ASTMD638 | 2030 | MPa | ||
| 拉伸模量 | ISO527-2/1 | 1670 | MPa | ||
| 抗张强度3(屈服) | ASTMD638 | 33.0 | MPa | ||
| 拉伸应力(屈服) | ISO527-2/5 | 31.0 | MPa | ||
| 抗张强度3(断裂) | ASTMD638 | 30.0 | MPa | ||
| 拉伸应力(断裂) | ISO527-2/5 | 29.0 | MPa | ||
| 伸长率3(屈服) | ASTMD638 | 5.6 | % | ||
| 拉伸应变(屈服) | ISO527-2/5 | 5.0 | % | ||
| 伸长率4(断裂) | ASTMD638 | 15 | % | ||
| 拉伸应变(断裂) | ISO527-2/5 | 13 | % | ||
| 弯曲模量4(50.0mm跨距) | ASTMD790 | 1760 | MPa | ||
| 弯曲模量5 | ISO178 | 1700 | MPa | ||
| 弯曲应力 | ISO178 | 44.0 | MPa | ||
| 弯曲强度4(屈服,50.0mm跨距) | ASTMD790 | 47.0 | MPa | ||
| 摩擦系数 | Dynamic | ASTMD3702Modified | 0.76 | ||
| 摩擦系数 | Static | ASTMD3702Modified | 0.62 | ||
| 磨损因数 | Ring | ASTMD3702Modified | 6.00 | 10^-10in^5-min/ft-lb-hr | |
| 磨损因数 | Washer | ASTMD3702Modified | 172 | 10^-10in^5-min/ft-lb-hr | |
| 悬壁梁缺口冲击强度(23°C) | ASTMD256 | 44 | J/m | ||
| 悬壁梁缺口冲击强度6(23°C) | ISO180/1A | 3.3 | kJ/m2 | ||
| 悬壁梁缺口冲击强度(23°C) | ASTMD4812 | 350 | J/m | ||
| 无缺口伊佐德冲击强度5(23°C) | ISO180/1U | 22 | kJ/m2 | ||
| 装有测量仪表的落镖冲击(23°C,TotalEnergy) | ASTMD3763 | 6.02 | J | ||
| 多轴向仪器化冲击能量 | ISO6603-2 | 1.38 | J | ||
| 载荷下热变形温度(0.45MPa,未退火,3.20mm) | ASTMD648 | 119 | °C | ||
| HeatDeflectionTemperature7(0.45MPa,Unannealed,64.0mmSpan) | ISO75-2/Bf | 105 | °C | ||
| 载荷下热变形温度(1.8MPa,未退火,3.20mm) | ASTMD648 | 65.0 | °C | ||
| 热变形温度7(1.8MPa,未退火,64.0mm跨距) | ISO75-2/Af | 60.0 | °C | ||
| 线形热膨胀系数-流动(-30到30°C) | ASTMD696 | 9.1E-5 | cm/cm/°C | ||
| CLTE-Transverse(-30to30°C) | ASTMD696 | 4.0E-3 | cm/cm/°C | ||
| 关于沙伯基础 LNP™ LUBRICOMP™ ML004S compound价格 | |||||
| 1.有关“未指定 沙伯基础 LNP™ LUBRICOMP™ ML004S compound”物性表及未指定塑料颗粒价格以出厂实时数据为准. 2.更多塑料颗粒行情敬请关注我们的资讯动态. | |||||
