长期供应未指定 LNP™ THERMOCOMP™ MF002AS compound原材料 ！关于LNP™ THERMOCOMP™ MF002AS compound注塑温度(成型温度),LNP™ THERMOCOMP™ MF002AS compound缩水率,LNP™ THERMOCOMP™ MF002AS compound流动性等相关参数请参照沙伯基础厂家提供的物性表数据。
以下数据由:PBT http://pbtsl.com/ 提供
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | ||
| 比重 | ASTMD792 | 0.958 | g/cm3 | ||
| 密度 | ASTMD792 | 0.960 | g/cm3 | ||
| 收缩率-流量(24小时) | ASTMD955 | 1.0to3.0 | % | ||
| MoldingShrinkage-AcrossFlow(24hr) | ASTMD955 | 1.0to3.0 | % | ||
| 吸水率(24hr,50%RH) | ASTMD570 | 0.020 | % | ||
| 吸水率(平衡,23°C,50%RH) | ISO62 | 0.060 | % | ||
| 拉伸模量2 | ASTMD638 | 3250 | MPa | ||
| 拉伸模量 | ISO527-2/1 | 2850 | MPa | ||
| 抗张强度3(屈服) | ASTMD638 | 43.1 | MPa | ||
| 拉伸应力(屈服) | ISO527-2/5 | 41.2 | MPa | ||
| 抗张强度 | 断裂 | ASTMD638 | 45.5 | MPa | |
| 抗张强度 | 断裂3 | ASTMD638 | 34.3 | MPa | |
| 拉伸应力(断裂) | ISO527-2/5 | 35.4 | MPa | ||
| 伸长率3(屈服) | ASTMD638 | 3.5 | % | ||
| 拉伸应变(屈服) | ISO527-2/5 | 3.4 | % | ||
| 伸长率 | 断裂 | ASTMD638 | 3.7 | % | |
| 伸长率 | 断裂3 | ASTMD638 | 5.5 | % | |
| 拉伸应变(断裂) | ISO527-2/5 | 4.9 | % | ||
| 弯曲模量 | 50.0mm跨距4 | ASTMD790 | 2600 | MPa | |
| 弯曲模量 | —— | ASTMD790 | 2850 | MPa | |
| 弯曲模量5 | ISO178 | 2380 | MPa | ||
| 弯曲强度 | ASTMD790 | 68.9 | MPa | ||
| 弯曲应力 | ISO178 | 58.0 | MPa | ||
| 弯曲强度4(屈服,50.0mm跨距) | ASTMD790 | 66.7 | MPa | ||
| 悬壁梁缺口冲击强度(23°C) | ASTMD256 | 43 | J/m | ||
| 悬壁梁缺口冲击强度6(23°C) | ISO180/1A | 4.2 | kJ/m2 | ||
| 悬壁梁缺口冲击强度(23°C) | ASTMD4812 | 380 | J/m | ||
| 无缺口伊佐德冲击强度5(23°C) | ISO180/1U | 25 | kJ/m2 | ||
| 装有测量仪表的落镖冲击(23°C,TotalEnergy) | ASTMD3763 | 8.50 | J | ||
| 多轴向仪器化冲击能量 | ISO6603-2 | 2.20 | J | ||
| 载荷下热变形温度(0.45MPa,未退火,3.20mm) | ASTMD648 | 146 | °C | ||
| HeatDeflectionTemperature7(0.45MPa,Unannealed,64.0mmSpan) | ISO75-2/Bf | 122 | °C | ||
| 载荷下热变形温度(1.8MPa,未退火,3.20mm) | ASTMD648 | 105 | °C | ||
| 热变形温度7(1.8MPa,未退火,64.0mm跨距) | ISO75-2/Af | 74.0 | °C | ||
| 线形热膨胀系数-流动(-30到30°C) | ASTMD696 | 7.6E-5 | cm/cm/°C | ||
| CLTE-Transverse(-30to30°C) | ASTMD696 | 1.1E-4 | cm/cm/°C | ||
| 关于沙伯基础 LNP™ THERMOCOMP™ MF002AS compound价格 | |||||
| 1.有关“未指定 沙伯基础 LNP™ THERMOCOMP™ MF002AS compound”物性表及未指定塑料颗粒价格以出厂实时数据为准. 2.更多塑料颗粒行情敬请关注我们的资讯动态. | |||||
