长期供应LDPE Petrothene® NA960070原材料 !关于Petrothene® NA960070注塑温度(成型温度),Petrothene® NA960070缩水率,Petrothene® NA960070流动性等相关参数请参照美国利安德巴塞尔厂家提供的物性表数据。
1、LLDPE/Petrothene® GA601031/美国利安德巴塞尔
2、LDPE/Braskem PE LDI2020/巴西布拉斯科
3、LDPE/Epolene® C-18/美国华美化学
4、LDPE/Eltex® MED PH27D630/瑞士英力士
5、LDPE/SureSpec LD20-020C/美国Genesis
6、LDPE/Petrothene® NA957/美国利安德巴塞尔
7、LDPE/Michithene R6100/美国API Polymers
8、LDPE/Petrothene® NA480145/美国利安德巴塞尔
9、LDPE/INEOS Wire & Cable BPD2142/瑞士英力士
10、LDPE/Trithene® TX 3003/巴西Petroquimica 收缩性薄膜,薄膜
以下数据由:PBT http://pbtsl.com/ 提供
性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | ||
密度 | ASTMD1505 | 0.920 | g/cm3 | ||
熔流率(熔体流动速率)(190°C/2.16kg) | ASTMD1238 | 1.0 | g/10min | ||
TensileStrength2(1.91mm) | ASTMD638 | 14.5 | MPa | ||
TensileElongation2(Break,1.91mm) | ASTMD638 | 660 | % | ||
薄膜厚度-经测试 | 32 | um | |||
SecantModulus-MD(BlownFilm) | ASTME111 | 200 | MPa | ||
SecantModulus-TD(BlownFilm) | ASTME111 | 234 | MPa | ||
TensileStrength-MD(Yield,32um,BlownFilm) | ASTMD882 | 24.1 | MPa | ||
TensileStrength-TD(Yield,32um,BlownFilm) | ASTMD882 | 16.5 | MPa | ||
TensileElongation-MD(Break,32um,BlownFilm) | ASTMD882 | 200 | % | ||
TensileElongation-TD(Break,32um,BlownFilm) | ASTMD882 | 500 | % | ||
落锤冲击(32um,吹塑薄膜) | ASTMD1709 | 120 | g | ||
ElmendorfTearStrength-MD(32um,BlownFilm) | ASTMD1922 | 300 | g | ||
ElmendorfTearStrength-TD(32um,BlownFilm) | ASTMD1922 | 130 | g | ||
维卡软化温度 | ASTMD1525 | 92.0 | °C | ||
关于美国利安德巴塞尔 Petrothene® NA960070价格 | |||||
1.有关“LDPE 美国利安德巴塞尔 Petrothene® NA960070”物性表及LDPE塑料颗粒价格以出厂实时数据为准. 2.更多塑料颗粒行情敬请关注我们的资讯动态. |